PowerGrip Manufacturing :: How To Re-Torque A PowerGrip Clamp Spring

The Automatic Heavy Duty Chain Replacement System For Roll-Off Trucks

Welcome To PowerGrip!

Making Hauling Safer

                                           Setting The Torque On The Spring

 
  
    10.1  Using the Spring Torquing Tooling installed as shown on the above picture perform a one and a quarter (1 Ľ)  rotation in the direction opposing the hook curvature.











10.2   Position the Spring Pin (#22) to enter in the nearest machined cavity of the Hook corresponding to the performed torquing.
  
  
    10.3   Place the Retaining Ring (#23) into its grooved seat on the shaft to lock the Hook in its final position.

Other Great Truck Products :: Transport Safety Links

Only The Best In Waste Removal

	10.1 Using the Spring Torquing Tooling installed as shown on the above picture perform a one and a quarter (1 Ľ) rotation in the direction opposing the hook curvature. 10.2 Position the Spring Pin (#22) to enter in the nearest machined cavity of the Hook corresponding to the performed torquing.
	10.3 Place the Retaining Ring (#23) into its grooved seat on the shaft to lock the Hook in its final position.